Doshi Line Preamplifier
The Doshi philosophy can be expressed in one word: balance. A balance of classical and cutting-edge technologies, of eastern and western sensibilities, of professional and residential design strengths. Nowhere is this sense of balance more evident than in the Doshi 3.0 Line Preamplifier.
Designed for residential use, The Doshi Line Preamplifier nonetheless takes advantage of sophisticated techniques developed for the recording industry. Based upon legendary studio hardware including Pultec EQs and Universal Audio Compressors, Doshi has developed a transformer-coupled volume control, a technology which helps our Line Preamplifier achieve the highest performance possible. The Doshi circuit provides differential, fully isolated floating outputs, thereby eliminating the possibility of ground loops at input or output, and assures absolute freedom from ground noise: an especially important consideration with digital sources.
To meet Doshi’s mandate of design simplicity, we employ a single gain stage, with one ECC99 Dual-Triode Vacuum Tube per channel: the first triode provides gain while the second is used as a “Follower” to minimize output impedance. Thanks to our rigorous circuit design, the Doshi Line Preamplifier offers zero negative feedback, low output impedance and can drive any cable and amplifier load.
The Doshi Linestage includes four differential inputs, each of which can be outfitted with XLR or RCA connectors, tailored to its owner’s needs (Two XLR and Two RCA are Standard). Inputs are relay-switched into a transformer which provides 31 precision steps. Home Theater Bypass is also provided, further augmenting versatility. Two sets of differential isolated outputs—also specified as RCA or XLR to the customer’s desires— and a 12V on/off Trigger complete this preamp’s comprehensive connectivity. Naturally, all functions of the Doshi Line Preamplifier have been placed under the control of an elegantly styled, machined aluminum remote handset.
Behind its sculpted aluminum faceplate, the chassis of our Line Preamplifier incorporates Doshi’s Three Stage Decoupling (TM) technology to virtually eliminate the influence of both external and internal resonances upon our circuits’ performance. Inside the chassis, critical audio circuits are point-to-point wired and mounted on an acoustically isolated sub-chassis. The entire chassis is suspended from a ½“ thick slab of laser-cut, DuPont Corian which, in turn, floats upon four vibration absorbing feet that are mechanically decoupled from the chassis. While our competitors build their enclosures from mild steel and aluminum, Doshi uses extremely strong 14 gauge stainless steel to create a chassis that is mechanically and electrically inert; as a result, our components provide an ideal foundation for performance.
As befits a state-of-the-art product, the Doshi Line Preamplifier includes an oversized power supply housed in a discrete, resonance-controlled chassis. Connected to the Preamplifier via a custom made cable, designed to Doshi’s proprietary specifications, our Power Supply includes a custom-built transformer. Manufactured by Toroid, this transformer has been massively over-specified to prevent resonances that occur when a transformer is run at full capacity. Avant-garde design techniques prevent modulation in the power supply.
The Doshi Line Preamplifier represents the highest level of performance ever achieved in an audio linestage. The product of timeless circuit designs, executed with the finest component parts and uncompromising build quality, the Doshi Line Preamplifier represents a lifetime investment in musical enjoyment.
For More Detailed Information Regarding The Doshi Line Preamplifier, Please Request Our Technical White Paper
Gain: 12db gain
S/N Ratio: over 100db
Tube Complement: 2 ea ECC99 long life driver tubes (one per channel)
Input Impedance: 10 kOhm
Output Impedance: 50 Ohm Typical
Truely Superior Sound –
The sound through the Doshi Audio V3.0 products was warm and inviting as in, “I must hear more”
Best of Show | Best Sound
A system wins here, one of Paragon Sight and Sound’s rooms featuring Wilson Audio Sasha 2s, Doshi Audio electronics, dCS Rossini DAC and Master Clock, Brinkmann Balance turntable and ’arm, My Sonic Labs Signature Platinum cartridge, and Transparent Reference cables. An oasis of musical calm anytime I stuck my head in the door.
Cardas Audio Excels with Joseph and Doshi
But I would be remiss to not include the new Hybrid Stereo amp ($19,995) from Doshi Audio that were powering everything. A gorgeous piece of amplifier, there are eight EL34 tubes with a mirror-like chrome cover of transformers behind reflecting the glass. Joining in the fun were Doshi’s line stage ($17,995) and tape pre ($17,995).
RMAF 2018: Joseph Audio, Doshi Audio, Cardas and the Rest of Your Life
This was one of Jeff’s best-sounding set-ups I’ve heard—and I’ve heard quite a few—which led me to believe that the Doshi Audio amplification, as well as the Cardas Clear Beyond cabling, were providing uncommon synergy in the room.
Doshi Audio Monoblock V3.0 power amplifier
The remarkably air-filled, three-dimensional, gratifyingly warm sound of Doshi Audio’s Monoblock V3.0 amplifiers demands a place on the short list of amplifier seekers who listen to music for hours on end.
– Jason Victor Serinus
Command Performance AV: Doshi Audio electronics
The system’s sound was very clean and transparent and easily showed the vast differences between either the 15-ips tapes or LPs that were played.
Capital Audiofest: Hitting the Ground Running
The system played it with a tremendous sense of ease, the music simply existing between the speakers without apparent effort. Chris Thile’s voice had well-defined, full-bodied presence in the room, and the limber, graceful phrases played by banjoist Noam Pikelny were breathtaking in their realism.
Want to Learn More?
If you have any general questions or wish to purchase equipment found on our website, please use the form below to reach out – we will get back with you as quickly as possible.